The Tomtech Micro range of controllers provide high performance, low cost control for heating, ventilation and screens. All of these controllers are very easy to use, with the built in LCD display, simple 3 key keypad and 'set' knob for changing setpoints.
 

The controllers are built to the same very high standard as all other Tomtech computers. All heating and ventilation controllers are supplied complete with an 'aspirated screen'. A high accuracy temperature sensor and air circulation fan, housed in a stove enamelled aluminium enclosure, measure the true air temperature. They are supplied with 25 metres of cable to easily connect this screen to the controller.
 

The Micro Screen is supplied with a light sensor and similar connecting cable. Other sensors can be added to measure humidity, heating pipe temperature, wind speed etc. where greater versatility is required.
 
 
 
 

2 Year Guarantee
All equipment in the range is waterproof to IP54. As a result, we are able to give a full 2 year guarantee (providing the equipment has been installed and used in accordance with the instruction manual).

Easy And Flexible Programming

Programming is in plain English with all setpoints protected so that they are not lost if there is a power failure. Each controller contains a built in clock which allows all of the heating and ventilation programmes to provide independent setpoints for day and night. Day and night times may be 'Fixed' so they remain the same each day, or set to adjust to track with sunrise and sunset.

The display allows simple monitoring of all measured values and shows all programming information. Lights on the front of the controller show when a vent, screen or heating valve is opening or closing and when on/off heaters are on.

Easy Installation
Installation is easy. The controllers are supplied with an aspirated screen or light sensor and sensor cable. Two screwdrivers and a pair of wire cutters are the only tools required.

mVent

Return to Main Page

Buy Now